Cantilever & slide gate operators
The workhorse of commercial entrances. Wide openings, heavy gates and constant traffic.
Cantilever vs. V-track
A cantilever gate hangs on roller trucks mounted to posts beside the opening and travels with nothing touching the ground. It’s the choice for mud, shell, gravel, heavy trucks and wide openings. It needs a counterweight tail, so the gate is roughly half again as long as the opening, and the run beside the opening has to be clear.
A V-track gate rolls on wheels in a track across the drive. It’s simpler and needs less side room, but the track has to stay clean and level.
Operators
Commercial slide operators are rated by gate weight, gate length and duty cycle. An HOA entrance or a yard gate that runs all day needs a continuous-duty operator. Ask for the ratings in writing and how close your gate comes to them.
What the install includes
- A level concrete pad for the operator
- Gate guides, a catch post and positive stops
- Photo eyes and edge sensors for every entrapment zone
- Guarding over rollers and the drive so nothing gets caught
- Vehicle detection loops or sensors
- Battery backup and surge protection
Questions
How wide can a slide gate be?
Commercial cantilever gates commonly span 30 feet or more. Very wide openings may use two gates that meet in the middle.
How much side room does a cantilever need?
Roughly one and a half times the opening, clear and fairly level.
Control the way in.
Tell us about the property. A commercial gate contractor follows up.
Request a proposal