Automated Gates of Louisiana

Gate safety & UL 325

Automatic gates are heavy and powerful. Two standards cover how operators and gates have to be built to keep people from getting hurt.

UL 325: the operator

UL 325 is the safety standard for gate operators sold in the United States. It sorts installations into usage classes:

  • Class I: residential, a home or a small group of homes.
  • Class II: commercial and general public access, like apartments, HOAs, hotels and businesses.
  • Class III: industrial or limited access, not open to the general public.
  • Class IV: restricted access with security staff, like prisons and airports.

The standard requires entrapment protection on each hazard zone: places where someone could be caught or crushed as the gate moves. Since 2016, operators must monitor those external safety devices, such as photo eyes and edge sensors, and won’t run normally without them working.

ASTM F2200: the gate

ASTM F2200 covers the gate itself: openings small enough that hands and arms can’t reach through near moving parts, guarded rollers, no protrusions, and positive stops.

What it means for you

  • Use an operator listed for your property’s usage class
  • Install safety devices on every hazard zone
  • Put warning signs on both sides of the gate
  • Keep pedestrians on a separate walk gate
  • Have the safety devices tested regularly

This is general information, not a compliance review. Have a qualified gate technician assess your gate against the current standards.

Questions

Is an old gate grandfathered?

Standards apply to equipment when it’s made and installed, but an older gate without entrapment protection is still a hazard. Many owners upgrade the safety devices or the operator.

Who is responsible for gate safety?

Property owners, installers and manufacturers all play a part. Talk to your installer and your insurer about your gate.

Control the way in.

Tell us about the property. A commercial gate contractor follows up.

Request a proposal
Request a proposal